>>>>>型号:IS200WNPSH1ABA 通用电气制造 可变电阻器
【功能描述】
IS200WNPSH1ABA是通用电气制造的组件。该板是Mark VI系统的一部分。Mark VI是GE的Speedtronic系统之一,专为管理各种复杂程度和尺寸的蒸汽/燃气轮机系统而设计。该系统可以构建为单工或TMR(三重模块化冗余)系统。
IS200WNPSH1ABA是双面板,两个表面都有组件。底面有一个单(公)多针连接器。这被标记为P1。后表面带有代码RA/00。前表面在顶面上还有两个连接器。这些是母插孔连接器,每个连接器有三个位置。插头放置在电路板的右侧。插头下方有一个金属氧化物压敏电阻,它是一个可变电阻器。
该IS200WNPSH1ABA有两条平行于电路板顶部边缘的快速熔断保险丝。保险丝标记为FU1-FU16,以及TR1至TR16。左上角有一个DIL整流桥组件(DN1)。
IS200WNPSH1ABA在工厂钻孔在三个角上。在板体上还有另外四个工厂钻孔。该板的散热器组件位于该板的左侧。该板有十个集成电路,以及电容器和电阻器。该板有几排二极管。还有三行组件平行于电路板底部放置。它们标记为B2、D2和Z2。
>>>>>型号:IS200WNPSH1ABA 通用电气制造 可变电阻器
【英文介绍】
The IS200WNPSH1ABA is a component manufactured by General Electric. The board is part of the Mark VI system. Mark VI is one of GE's Speedtronic systems designed to manage steam/gas turbine systems of all complexity and sizes. The system can be built as a simplex or TMR (Triple modular Redundancy) system.
The IS200WNPSH1ABA is a dual panel with components on both surfaces. There is a single (male) multi-pin connector on the underside. This is labeled P1. The rear surface carries code RA/00. The front surface also has two connectors on the top surface. These are female jack connectors and each connector has three positions. The plug is placed on the right side of the board. Under the plug is a metal oxide varistor, which is a variable resistor.
The IS200WNPSH1ABA has two fast blown fuses parallel to the top edge of the board. The fuses are marked FU1-FU16, and TR1 to TR16. There is a DIL rectifier bridge assembly (DN1) in the upper left corner.
IS200WNPSH1ABA drilled holes at three corners in the plant. There are another four factory holes in the body of the plate. The radiator assembly of the board is located on the left side of the board. The board has ten integrated circuits, as well as capacitors and resistors. The board has several rows of diodes. There are also three rows of components placed parallel to the bottom of the board. They are labeled B2, D2, and Z2.
>>>>>型号:IS200WNPSH1ABA 通用电气制造 可变电阻器