AO810V2 3BSE038415R1  | 模拟输出 | CI853 3BSE018103R1 |  TU830V1 3BSE013234R1 

　　基本信息

　　型号：AO810V2 3BSE038415R1

　　类型：模拟输出

　　信号规格：0..20毫安，4..20毫安

　　通道数： 8

　　AO810/AO810V2 模拟输出模块具有 8 个单极性模拟输出通道。为了监控与D/A转换器的通信，串行数据被回读和验证。在回读期间接收开路诊断。该模块循环执行自诊断。模块诊断包括过程电源监控，当输出电路的电源电压较低时，会报告该监控。该错误报告为通道错误。信道诊断包括信道的故障检测(仅在活动信道上报告)。如果输出电流小于输出设定值且输出设定值大于 1 mA，则报告错误。

　　特点和优势

　　8 通道 0...20 mA，4...20 mA 输出

　　OSP 在检测到错误时将输出设置为预定状态

　　模拟输出短路固定至ZP或+24 V

　　Basic information

　　Model: AO810V2 3BSE038415R1

　　Type: Analog output

　　Signal specification: 0... 20 mah, 4... 20 ma

　　Number of channels: 8

　　The AO810/AO810V2 analog output module has 8 unipolar analog output channels. To monitor communication with the D/A converter, serial data is read back and verified. Receive open circuit diagnostics during read back. The module performs a self-diagnosis loop. Module diagnostics include process power monitoring, which is reported when the power supply voltage of the output circuit is low. The error is reported as a channel error. Channel diagnostics includes fault detection of the channel (reported only on the active channel). If the output current is less than the output set value and the output set value is greater than 1 mA, an error is reported.

　　Characteristics and advantages

　　8 channel 0... 20 mA, 4... 20 mA output

　　The OSP sets the output to a scheduled state when an error is detected

　　Analog output shorted fixed to ZP or +24 V