500BIO01 1MRB150005R1/J | 500PSM03A 1MRB150038R1 |模拟输入模块

　　型号:500BIO01 1MRB150005R1/J

　　品牌:ABB

　　额定电流:1A

　　额定电压:230V AC

　　控制方式:开环控制

　　过载保护、欠压保护、过压保护、短路保护等

　　通讯接口RS232、RS485

　　尺寸:100 × 50 × 40毫米

　　重量:0.5公斤

　　500BIO01 1MRB150005R1/J模拟输入模块是专门为模拟信号采集和转换而设计的器件。它通常由多个模拟输入通道组成，每个通道都可以接收模拟信号并将其转换为数字信号，由数字系统进行处理。当模拟信号沿模拟输入端口进入模块时，模块将被采样和量化。采样是指在一定频率下对信号进行采样，量化是指将采样值转换为数字量。这些数字值可以传输到数字系统进行存储、分析或控制。

　　应用

　　500BIO01 1MRB150005R1/J可用于恶劣环境:

　　工作温度-40℃~ +70℃。

　　减振(IEC61131-2 / IEC60068-26)。

　　耐腐蚀气体(IEC60721-3.3 3C2)，如H2S, SO2/SO3, NOX。

　　耐盐雾(EN60068-2-52/ EN60068-2-11)。

　　高海拔，海拔4000米或高达620 hPA。

　　EMC (EN61000-4-4和EN61000-4-5)。

　　抗冲击性(IEC60068-2-27)。

　　静电放电最大8千伏。

　　500BIO01 1MRB150005R1/J | 500PSM03A 1MRB150038R1 | analog input module.

　　Model: 500BIO01 1MRB150005R1/J

　　Brand: ABB

　　Rated current: 1A

　　Rated voltage: 230V AC

　　Control mode: open loop control

　　Protection function Overload protection, undervoltage protection, overvoltage protection, short circuit protection, etc

　　Communication ports RS232, RS485

　　Dimensions: 100 x 50 x 40 mm

　　Weight: 0.5kg

　　The 500BIO01 1MRB150005R1/J analog input module is a device specially designed for analog signal acquisition and conversion. It usually consists of multiple analog input channels, each of which can receive an analog signal and convert it into a digital signal for processing by a digital system. When the analog signal enters the module along the analog input port, the module will be sampled and quantized. Sampling refers to sampling the signal at a certain frequency, while quantization refers to converting the sampled value into a digital quantity. These digital values can be transferred to a digital system for storage, analysis, or control.

　　Apply

　　500BIO01 1MRB150005R1/J can be used in harsh environments:

　　Operating temperature -40ºC to +70ºC.

　　Anti-vibration (IEC61131-2/IEC60068-26).

　　Corrosion-resistant gases (IEC60721-3.3 3C2) i.e. H2S, SO2/SO3, NOX.

　　Salt spray resistance (EN60068-2-52/ EN60068-2-11).

　　High altitude, 4000 m above sea level or up to 620 hPA.

　　EMC (EN61000-4-4 and EN61000-4-5).

　　Impact resistance (IEC60068-2-27).

　　Electrostatic discharge Max. 8 KV.