>>>>>型号:BNC-2110 屏蔽接线端子 模拟输出设备
【功能描述】
National Instruments BNC-2110 接线端子
BNC-2110（部件号：777643-01）是一款屏蔽， DIN导轨， 桌面安装接线端子。该接线端子提供 68 针、母头 SCSI 到 1 针母头 BNC（15 个）、30 针母头、弹簧端子连接。NI BNC-2110 设计 用于 各种 NI 多功能 I/ O 和 模拟 输出 设备。BNC-2110 有助于简化模拟信号以及一些数字信号与 DAQ 设备的连接。使用此接线端子，BNC-2110 带有屏蔽外壳，因此您可以实现更好的测量完整性。桌面安装和DIN导轨安装配置可通过此屏蔽接线端子实现。
该设备使用NI-DAQmx驱动软件运行，该软件与LabVIEW、LabWindows/CVI或Measurement Studio等软件包兼容。可以使用Measurement & Automation Explorer（MAX）工具配置设备硬件。
NI BNC-2110 可 与 100 引脚 或 68 引脚 E/ M/ S 系列 或 68 引脚 NI-672x、 NI-671x 和 NI-673x 模拟 输出 （AO 系列） 数据采集设备 配合使用 。NI BNC-2110 广泛用于要求苛刻的生产、测试和实验室环境。BNC-2110 仅用于差分模拟输入信号。使用此接线端子，您可以通过将 BNC 连接器下方的相应开关移动到 FS 位置来测量浮动信号。此外，该接线端子还可以测量接地参考信号。对于以地为参考的信号，将用于 AI 通道的 BNC 连接器下方的开关移动到 GS 位置。该设备配备 15 个 BNC 连接器，并具有一个 68 针公 SCSI 公 I/O 连接器。
>>>>>型号:BNC-2110 屏蔽接线端子 模拟输出设备
【英文介绍】
National Instruments BNC-2110 terminal
Ncc-2110 (Part number: 777643-01) is a shielded, DIN rail, tabletop mount terminal. The wiring terminal provides 68 pins, female head SCSI to 1 pin female head BNC (15), 30 pin female head, spring terminal connection. The NI BNC-2110 is designed for a wide range of NI multifunction I/ O and analog output devices. The BNC-2110 helps simplify the connection of analog signals, as well as some digital signals, to DAQ devices. With this terminal, the BNC-2110 comes with a shielded housing, so you can achieve better measurement integrity. Desktop mounting and DIN rail mounting configurations can be achieved with this shielded terminal.
The device runs with NI-DAQmx driver software, which is compatible with packages such as LabVIEW, LabWindows/CVI or Measurement Studio. Device hardware can be configured using the Measurement & Automation Explorer (MAX) tool.
The NI BCN-2110 can be used with 100-pin or 68-pin E/ M/ S series or 68-pin NI-672X, NI-671X and NI-673X analog output (AO series) data acquisition devices. The NI BNC-2110 is widely used in demanding production, test and laboratory environments. BNC-2110 is used only for differential analog input signals. With this terminal, you can measure the floating signal by moving the corresponding switch under the BNC connector to the FS position. In addition, the terminal can also measure the ground reference signal. For a ground-referenced signal, move the switch under the BNC connector for the AI channel to the GS position. The device is equipped with 15 BNC connectors and features a 68-pin male SCSI male I/O connector.
>>>>>型号:BNC-2110 屏蔽接线端子 模拟输出设备
