>>>>>型号:PR9376/010-011 轴振传感器
【功能描述】
PR9376/010-011是一种轴振传感器,通常与前置器一起形成一个振荡器。
其振幅随着传感器探头与金属被测物的接近与衰减,衰减的幅度与传感器和被测物之间的距离成正比。
这种传感器在出厂前已经使用校准材料进行了线性校准,因此在安装时不需要再进行校准。
用户只需要调整传感器和测量面之间的气隙,直至从前置器的输出得到所需信号。
PR9376/010-011传感器有多种型号和配置可供选择,以满足不同的测量需要和环境要求。
它带有安装螺纹或矩形安装法兰,测量范围为1mm至20mm。螺纹尺寸也有多种选择,
包括ф6mm、ф10mm和ф18mm的公制或英制螺纹。此外,根据型号的不同,传感器还可以选择不同的电缆类型、长度和接头方式等。
>>>>>型号:PR9376/010-011 轴振传感器
【英文介绍】
The PR9376/010-011 is a shaft vibration sensor that is usually combined with a preprocessor to form an oscillator.
The amplitude is proportional to the distance between the sensor and the measured object as the sensor
probe approaches and attenuates.
This sensor has been linearly calibrated using calibration materials before leaving the factory, so no further
calibration is required at installation. The user only needs to adjust the air gap between the sensor and the
measuring surface until the desired signal is obtained from the output of the preprocessor.
The PR9376/010-011 sensor is available in a variety of models and configurations to meet different measurement
needs and environmental requirements. It comes with mounting threads or rectangular mounting flanges with
measuring ranges from 1mm to 20mm. There are also a variety of thread sizes available, including the Phi 6mm,
Phi 10mm, and Phi 18mm metric or imperial threads. In addition, depending on the model, the sensor can also
choose different cable types, lengths and connector methods.
>>>>>型号:PR9376/010-011 轴振传感器