>>>>>型号:1756-RM2 冗余增强型模块 冗余光纤端口
【功能描述】
Allen-Bradley 1756-RM2是一个ControlLogix冗余模块。它具有速度高达1000 Mbps的增强功能。当与两个机箱中的1756-L7x控制器配对时，它可以提供最佳的扫描性能。对于交叉负载，1756-RM2使用无单点故障的冗余光纤端口。在通道切换期间，处理机箱保持同步，而扫描时间可能会遇到大约10毫秒的延迟。它具有增强的安全功能，具有无干扰诊断功能。
1756-RM2冗余模块在5.1V DC时消耗1.16 A电流，在24V DC时消耗3.4 mA电流。它的最大功耗为6W，热耗散为21 BTU/小时。它可以安装在ControlLogix机箱的任何插槽中。1756-RM2重0.64磅。它有一个开放的外壳。对于通信，它支持多达7个增强型控制网络和以太网/IP通信模块。对于布线，1756-RM2支持1756-RMC1、1756-RMC3和1756-RMC10电缆，长度分别为1米、3米和10米。
>>>>>型号:1756-RM2 冗余增强型模块 冗余光纤端口
【英文介绍】
Allen-Bradley 1756-RM2 is a ControlLogix redundant module. It has enhanced features with speeds up to 1000 Mbps. When paired with the 1756-L7x controller in both cases, it provides the best scanning performance. For cross loads, the 1756-RM2 uses redundant fiber optic ports with no single point of failure. During channel switching, the processing chassis stays synchronized, while scan times can experience a delay of about 10 milliseconds. It has enhanced security features with interference-free diagnostics.
The 1756-RM2 redundant module consumes 1.16A current at 5.1V DC and 3.4 mA current at 24V DC. It has a maximum power consumption of 6W and a heat dissipation of 21 BTU/ hour. It can be installed in any slot in the ControlLogix chassis. 1756-RM2 weighs 0.64 LBS. It has an open shell. For communication, it supports up to 7 enhanced control networks and Ethernet /IP communication modules. For cabling, the 1756-RM2 supports 1756-RMC1, 1756-RMC3, and 1756-RMC10 cables in lengths of 1, 3, and 10 meters, respectively.
>>>>>型号:1756-RM2 冗余增强型模块 冗余光纤端口
