>>>>>型号:8200-226 伺服阀驱动器 伺服位置控制器
【功能描述】
8200-226 伺服位置控制器 （SPC） 设计为伺服阀驱动器，可接受 DeviceNet 或基于 4 至 20 毫安的位置需求信号。 8200-226 可以精确定位比例伺服阀和积分伺服阀。
该控制器还能够通过接受来自最多两个冗余交流电设备或一个直流设备的反馈信号来处理阀门位置传感。8200-226 安装了基于 Windows 的软件，以正确配置模型、调整可调组件，并通过远程个人计算机监控设备的参数。
连接控制器时，请确保您选择的电源线受到适当保护，为了正确保护控制器，该线路应为 5 A、125 V 保险丝，当控制器通电时，该保险丝应能够承受 20 A 和 100 ms 的浪涌。确保控制器放置在远离潜在高电压或具有大电流的设备的区域，以及远离可能接触水的地方，不仅对于控制器的正常运行，而且对于正确安装也至关重要。
>>>>>型号:8200-226 伺服阀驱动器 伺服位置控制器
【英文介绍】
The 8200-226 Servo Position Controller (SPC) is designed as a servo valve driver and accepts DeviceNet or position demand signals based on 4 to 20 mA. The 8200-226 allows precise positioning of proportional and integral servo valves.
The controller is also capable of handling valve position sensing by receiving feedback signals from up to two redundant AC devices or one DC device. The 8200-226 is equipped with Windows-based software to properly configure models, adjust adjustable components, and monitor the device's parameters from a remote personal computer.
When connecting the controller, make sure that the power cord you choose is properly protected, in order to properly protect the controller, the line should be A 5 A, 125 V fuse, which should be able to withstand a 20 A and 100 ms surge when the controller is energized. Ensuring that the controller is placed in an area away from potentially high voltages or devices with high currents, and away from areas where it may come into contact with water, is critical not only for the proper operation of the controller, but also for proper installation.
