>>>>>型号:TG-13（8516-038）调速器控制单元
【功能描述】
TG-13（8516-038）调速器控制单元
TG-13（8516-038） 汽轮机机械-液压调速器,螺杆转速设定范围为1200-2400 rpm,额定转速下降为2010 rpm)驱动轴顺时针旋转,适用于ATEX位置。调速器的16N.m(12 ft-lb)逆时针旋转输出端子
TG-13压铸铝机械液压降速调节器控制TG-13（8516-038） 汽轮机驱动泵、压缩机或发电机,在这些地方不需要同步(恒速)运行。调速器通过输入驱动轴感应汽轮
机转子速度来控制汽轮机速度,将该速度与内部速度设定值进行比较,然后使用连接至汽轮机调速阀的旋转输出终端轴来控制汽轮机入口蒸汽流量。
这种独立的调速器利用一个集成的驱动轴驱动的球头组件来检测涡轮机速度,并利用一个集成的驱动轴驱动的油泵来产生必要的输出力,以移动/控制
涡轮机的调速阀。替换为:带超速试验装置的TG-13（8516-038） ,或不带OSTD的9904-827应用:在不需要同步(恒速)运行的地方,TG-13（8516-038） 驱动汽轮机:泵压缩机/涡轮膨胀
机压力和入口抽风机发电机特点:低成本速度下降控制顺时针驱动轴防风雨结构独立集水坑NEMA A速度控制16牛米(12英尺-磅)输出专为恶劣环境设计已通过HAZLOC和ATEX地区的认证.
>>>>>型号:TG-13（8516-038）调速器控制单元
【英文介绍】
TG-13 (8516-038) governor control unit
TG-13 (8516-038) Turbine mechanical-hydraulic governor, screw speed setting range 1200-2400 rpm, rated speed down to 2010 rpm) Drive shaft rotates clockwise,
suitable for ATEX position. The 16N.m(12 ft-lb) output terminal of the governor rotates counterclockwise
The TG-13 Mechanical Hydraulic decelerator controls the TG-13 (8516-038) steam turbine to drive pumps, compressors or generators, where synchronous (constant speed)
operation is not required. The governor senses the steam turbine through the input drive shaft
The rotor speed is used to control the turbine speed. This speed is compared to the internal speed set value, and the steam flow at the turbine inlet is controlled using
the rotary output terminal shaft connected to the turbine speed-regulating valve.
This independent governor utilizes an integrated drive shaft-driven ball head assembly to detect turbine speed and an integrated drive shaft-driven oil pump to generate
the necessary output force for movement/control
Speed regulating valve of turbine. Replace with: TG-13 (8516-038) with overspeed test device, or 9904-827 without OSTD Application: Where synchronous (constant speed)
operation is not required,TG-13 (8516-038) Drive Turbine: Pump compressor/Turbo expander pressure and inlet exhauster generator Features: Low cost speed drop control
Clockwise drive shaft weatherproof construction Separate sump NEMA A Speed control 16 nm (12 ft - lb) output designed for harsh environments Certified for HAZLOC and ATEX regions.
>>>>>型号:TG-13（8516-038）调速器控制单元
