VMIVME-1150 |导模组| 760-P1-G1-S1-LO-A20-R-E

　　模型:vmivme - 1150

　　类别:指南模块

　　保修:365天

　　配送方式:顺丰快递/联邦快递

　　汇款方式:电汇/西联汇款

　　净产品厚度/长度:114.3 mm

　　产品高度:45mm

　　产品宽度:130.5 mm

　　净重:0.4kg。

　　输入模块，又称监控模块，是与外部发射装置相连的元件，主要用于接收外部信号，并将其转换为CPU模块可接受的信号。VMIVME-1150在火灾自动报警系统中，输入模块用于将外部设备(如水流指示器、信号阀等)的信号引入火灾自动报警主机进行监控。

　　从硬件角度来看，输入模块的工作原理主要包括以下几个方面:

　　数据输入:外部设备通过接口向输入模块输入数据，接口将来自外部设备的数据转换为计算机可识别的信号，如电压信号、数字信号等。

　　数据传输:VMIVME-1150输入模块将接收到的数据传递给中央处理器(CPU)，通常通过总线或其他数据传输通道实现。

　　功能特征

　　电路板特点:这款64位光耦合数字输入板是专门为wME设计和优化的。具有高隔离，VMIVME-1150提供了灵活性。低成本的8字节数字输入端口，具有高抗噪性。的

　　兼容性:VMlVME-1150是标准的双高印刷电路板，具有与VME的电气和机械兼容性。

　　输入机构:8个输入端口，每个8位宽。端口被安排为8个连续的8位只读寄存器。

　　寻址方案:每个8位端口可以在8位或16位边界上单独寻址受监督的或短的非特权的l/0空间。

　　单板地址:单板地址由板载DlP选择。WME背板可以安装在主板上除1号槽位外的任意槽位。

　　VME访问:地址修改位被解码以支持短监督访问或非特权短i /O访问。

　　VMIVME-1150 | Guide module | 760-P1-G1-S1-LO-A20-R-E

　　Model :VMIVME-1150

　　Category: Guide module

　　Warranty :365 days

　　Delivery method: SF Express/Federal

　　Remittance: Wire transfer/Western Union

　　Net product thickness/length :114.3 mm

　　Product height :45 mm

　　Product width :130.5 mm

　　Net weight: 0.4kg.

　　An input module, also known as a monitor module, is a component connected to an external transmitting device, which is mainly used to accept an external signal and convert it into a signal acceptable to the CPU module. VMIVME-1150 In the automatic fire alarm system, the input module is used to introduce signals from external devices (such as water flow indicators, signal valves, etc.) into the automatic fire alarm host for monitoring.

　　From the hardware point of view, the working principle of the input module mainly includes the following aspects:

　　Data input: The external devices input data into the input module through the interface, and the interface will convert the data from the external devices into signals that can be recognized by the computer, such as voltage signals, digital signals, etc.

　　Data transfer: The VMIVME-1150 input module passes the received data to the central processing unit (CPU), which is usually achieved through a bus or other data transmission channel.

　　Functional characteristics

　　Board Features: This 64-bit optically coupled, digital input board is specifically designed and optimized for wME. With high isolation, the VMIVME-1150 offers flexibility. Low cost 8-byte digital input port with high noise resistance. the

　　Compatibility: The VMlVME-1150 is a standard dual-height printed circuit board for electrical and mechanical compatibility with VME.

　　Input organization :8 input ports, each 8 bits wide. The port is arranged as eight consecutive 8-bit, read-only registers.

　　Addressing scheme: Each 8-bit port can individually address supervised or short unprivileged l/0 Spaces on 8-bit or 16-bit boundaries.

　　Board address: Board address is selected by on-board DlP. The WME backplane can be operated in any available slot on the mainboard, except slot 1.

　　VME access: The address modification bits are decoded to support short supervised access or unprivileged short i /O access.