MIVME-2170A | 光耦合数字器件 | VMIVME-7750 | VMIVME-7700
型号;VMIVME-2170A
类别:光耦合数字器件
保修:365天
配送方式:顺丰快递/联邦快递
汇款方式:电汇/西联汇款
特点:
.32光隔离输出
2.5或300毫安输出
外部供电的上拉电压，最大隔离
现场可配置上拉电阻
具有低电流选项的源或汇输出能力
高输出电压容差30w正常模式
高隔离电位;最后1kv，脉冲6kv
正面或负面的实物期权
8位或16位数据传输
板载DlP交换机提供14位板地址选择
双欧洲卡格式与前面板
非特权或监督短l/0传输可选字段
功能特征
VMIVME-2170A光耦合数字器件输出板由vMEbus兼容逻辑、数据组成控制逻辑、4个8位输出寄存器和32个光隔离高级输出组成。该板实现为双板Eurocard形式的Pc板，并提供所有必要的地址解码和数据传输控制逻辑，以接受8位和16位数据传输。光耦合器将32个输出相互隔离，并与VMEbus隔离。两个主管和支持非特权数据传输。
应用程序:
来自VMEbus的数字控制
消除系统接地回路
高电气噪声环境下的控制
多电位系统组件的控制
Model :VMIVME-2170A
Category: optically coupled digital devices
Warranty :365 days
Delivery method: SF Express/Federal
Remittance: Wire transfer/Western Union
Features:
.32 Optical isolation output
2.5 or 300 mah output
Externally supplied pull-up voltage for maximum isolation
Field configurable pull-up resistance
Source or sink output capability with low current options
High output voltage tolerance 30w Normal mode
High isolation potential; Last 1kv, pulse 6kv
Positive or negative real options
8-bit or 16-bit data transfer
The on-board DlP switch provides a 14-bit board address selection
Dual Eurocard format with front panel
Field optional for non-privileged or supervised short l/0 transfers
Functional characteristics
The VMIVME-2170A optically coupled digital device output board consists of vMEbus compatible logic, data composed control logic, four 8-bit output registers, and 32 optically isolated advanced outputs. The board is implemented as a two-board Eurocard form factor Pc board and provides all the necessary address decoding and data transfer control logic to accept both 8-bit and 16-bit data transfer. The optocoupler isolates 32 outputs from each other and from the VMEbus. Two supervisors and support for non-privileged data transfer.
Application program:
Digital control from VMEbus
Eliminate the system grounding loop
Control in high electrical noise environments
Control of multi-potential system components
