>>>>>型号:IS200SPIDG1ABA 主站网关 I/O 模块 设置相同的通讯参数
【功能描述】
IS200SPIDG1ABA主站网关I/O模块的配对方式如下：
连接主站网关和I/O模块的通讯电缆。
打开主站网关和I/O模块的电源。
在主站网关上设置通讯参数，包括波特率、奇偶校验、数据位和停止位等。
在I/O模块上设置相同的通讯参数。
在主站网关上扫描I/O模块，并选择要配对的模块。
在I/O模块上选择要配对的主站网关。
确认主站网关和I/O模块的配对信息，并保存设置。
需要注意的是，具体的配对方式可能会因不同的制造商和型号而有所不同。因此，在使用该模块时，建议参考相关制造商提供的技术规格和操作手册，以确保正确使用和维护。
>>>>>型号:IS200SPIDG1ABA 主站网关 I/O 模块 设置相同的通讯参数
【英文介绍】
IS200EGDMH1AFF is an exciter field grounding detection module, which is the functional abbreviation of EGDM.
During the installation, the module will be installed on the backplane of the excitation power supply or the terminal block of the exciter. It is used to detect the ground status of the excitation magnetic field and output the detection result to the control system or display instrument to realize the ground protection and control of the excitation.
It should be noted that the above information is for reference only, if necessary, it is recommended to consult professional and technical personnel.
The difference between IS200EGDMH1ADF and IS200EGDMH1AFF is that the former is the excitation field grounding detection module, and the latter is the excitation field grounding detection module.
During the installation process, the former is installed on the backplane of the excitation power supply or the terminal block of the exciter, which is used to detect the ground state of the excitation magnetic field, and output the detection result to the control system or display instrument to realize the ground protection and control function of the exciter. The latter is mounted on the excitation power backplane rack, close to the EPSM module, and operates on stand-alone systems, which require one EGDM, and redundant systems, which require three EGDM modules.
>>>>>型号:IS200SPIDG1ABA 主站网关 I/O 模块 设置相同的通讯参数
