IS220PDIAH1A  |  Mark V系列  | 通信模块

　型号：IS220PDIAH1A

　　触点润湿输出 :32 伏直流电

　　功能缩略语/缩写: PDIA的

　　最小电压 ：27.4 伏直流电

　　型号类型 ：离散 I/O 包

　　零件编号：IS220PDIAH1A

　　与Mark V系列中的其他型号相比，IS220PDIAH1A不一定有特定的面板，因为它是一个!/0包。在设备的正面有七个指示灯，在包装的右侧有三个组的电源指示灯和两个链路指示灯，一个表示ENet1，另一个表示ENet2。在这三个指示器下面，有一个以太网端口，用于将模型连接到以太网,以方便以太网通信。

　　IS220PDIAH1A包具有位置标准，其中两个是UL 600790 Ed。5和UL60079-15版。3用于1C|级2区组。该信息可在GEH-6725 Mark V控制设备Hazloc手册中找到，该手册位于手册选项卡下。

　　Model: IS220PDIAH1A

　　Contact wetting output :32 volts DC

　　Functional acronym/abbreviation: PDIA

　　Minimum voltage: 27.4 volts DC

　　Model Type: Discrete I/O packet

　　Part number: IS220PDIAH1A

　　Compared to other models in the Mark V series, the IS220PDIAH1A doesn't necessarily have a specific panel, just because it is one! The /0 packet. There are seven indicators on the front of the device, and on the right side of the package there are three groups of power indicators and two link indicators, one for ENet1 and the other for ENet2. Underneath these three indicators, there is an Ethernet port for connecting the model to Ethernet to facilitate Ethernet communication.

　　The IS220PDIAH1A package has location standards, two of which are UL 600790 Ed. 5 and UL60079-15 editions. 3 For 1C| level 2 area group. This information can be found in the GEH-6725 Mark V Control Device Hazloc manual, which is located under the Manual TAB.