IC697CMM741  | 可编程逻辑控制器模块 |  指示灯中有 3 个提供串行端动状态

      产品参数:

　　型号:IC697CPX782

　　一输入电压:24V DC

　　输出电压:5V DC

　　通信:以太网，RS-232,RS-485

　　·内存容量:64K字

　　GEIC697CPX782 plc模块是一款高性能可编程逻辑控制器模块，专为工业自动

　　化应用而设计。它提供了先进的功能和可靠性，使其适用于广泛的控制系统要

　　求。

　　IC697CPX782模块是设计用于GE Fanuc系列90-70可编程逻辑控制器的CPU模块。除了 1 MB 的电池备份存储器外，该模块还包括 256 KB 的非易失性存储器。IC697CPX782 模块在版本 7.92 及更高版本中支持 BMA。IC697CPX782模块所基于的微处理器是 80486DX4 微处理器，时钟速度为 96 兆赫兹。IC697CPX782 模块支持的 I/O 包括最多 8000 个模拟 I/O 和 12,000 个 I/O(任意混音)。处理单个布尔函数所需的额定时间为 0.4 微秒。IC697CPX782模块支持系统内固件升级。模块的配置是通过计算机上运行的软件执行的，这些软件通过以太网或串行连接与模块连接。

　　通过以太网将编程器连接到IC697CPX782模块需要在 PLC 中安装以太网接口模块。 可以通过 3 个板载串行端口通过串行端口将编程器连接到IC697CPX782模块。3个端口支持的协议如下：端口1支持RS-232通信，端口2和端口3都支持RS-485通信。模块前面板上的 5 个 LED 指示灯中有 3 个提供串行端动状态。

　　Product parameters:

　　Model :IC697CPX782

　　One input voltage :24V DC

　　Output voltage :5V DC

　　Communication: Ethernet, RS-232,RS-485

　　· Memory capacity :64K words

　　The GEIC697CPX782 plc module is a high-performance programmable logic controller module designed for industrial automation

　　Designed for application. It offers advanced features and reliability that make it suitable for a wide range of control systems

　　Please.

　　The IC697CPX782 module is a CPU module designed for GE Fanuc series 90-70 programmable logic controllers. In addition to 1 MB of battery backup memory, the module includes 256 KB of non-volatile memory. The IC697CPX782 module supports BMA in version 7.92 and later. The microprocessor on which the IC697CPX782 module is based is the 80486DX4 microprocessor with a clock speed of 96 MHZ. The IC697CPX782 module supports up to 8,000 analog I/ OS and 12,000 I/ OS (any mix). The rated time required to process a single Boolean function is 0.4 microseconds. The IC697CPX782 module supports firmware upgrade in the system. The configuration of the module is performed by software running on the computer, which is connected to the module via Ethernet or serial connection.

　　Connecting the programmer to the IC697CPX782 module via Ethernet requires an Ethernet interface module to be installed in the PLC. The programmer can be connected to the IC697CPX782 module via 3 on-board serial ports. The three ports support the following protocols: Port 1 supports RS-232 communication, and port 2 and port 3 both support RS-485 communication. Three of the five LED indicators on the front panel of the module provide serial terminal status.