欢迎光临成都阳光熹禾电气有限公司官网!
工业设备配件供应 专业销售 库存齐全
全国咨询热线:18859254943

FBM42 | 内置诊断和故障检测 | 高速数字输入/输出通道

FBM42 | 内置诊断和故障检测 | 高速数字输入/输出通道  型号:FBM42  产品参数:  一输入电压:24vdc  一输出电压:5vdc  一通信接口:RS485  一工作温度:-40℃~ 70C  尺寸:10cm x10cm x2cm  规格:  一高速数字输入/输出通道  一灵活的配置选项  一内置诊断和故障检测  一易于安装和维护  产品详情:  FBM42 使用的

电话/Phone:18859254943 (微信同号)

邮箱/Email:sales@ygdcs.com

QQ:3561040004

产品详情

    FBM42  |  内置诊断和故障检测  |  高速数字输入/输出通道

  型号:FBM42

  产品参数:

  一输入电压:24vdc

  一输出电压:5vdc

  一通信接口:RS485

  一工作温度:-40℃~ 70°C

  尺寸:10cm x10cm x2cm

  规格:

  一高速数字输入/输出通道

  一灵活的配置选项

  一内置诊断和故障检测

  一易于安装和维护

  产品详情:

  FBM42 使用的模块现场总线.

  FBM42 接受来自冗余2Mbps现场总线的任何一条路径(A或b)的通信--如果一条路径出现故障或在系统级进行切

  换,模块将继续通过有效路径进行通信。

  终端组件现场I/0信号通过以下方式连接到FBM子系统:0DIN导轨安装终端组件(TA),或口基板安装TA。D使用聚酰胺(PA)

  材料的压缩螺杆式口使用聚酰胺(PA)材料的环形接线片区域的基板安装TA可与使用聚碳酸酯/丙烯腈-丁二烯-苯乙烯(PC/ABS)材料的压缩螺杆式端子一起使用。可拆卸终端电缆通过安装FBM的底板上的现场连接器将DIN轨道安装TA连接到FBM。终端电缆有以下材料:0聚氨酯D低烟无卤(LSZH)。端接电缆有多种长度,长可达30米(98英尺),允许将端接组件安装在外壳或在相邻外壳中。

  输入通道8个电阻式温度检测器(RTD)输入通道。每个通道都是隔离和独立的。

  Model: FBM42

  Product parameters:

  One input voltage :24vdc

  One output voltage :5vdc

  Communication interface :RS485

  A working temperature :-40℃~ 70°C

  Size :10cm x10cm x2cm

  Specifications:

  A high speed digital input/output channel

  A flexible configuration option

  A built-in diagnosis and fault detection

  Easy to install and maintain

  Product Details:

  Module fieldbus used by FBM42.

  The FBM42 accepts communication from any path (A or b) of the redundant 2Mbps fieldbus - if a path fails or is cut at the system level

  If not, the module will continue to communicate via a valid path.

  The terminal assembly field I/0 signal is connected to the FBM subsystem by :0DIN rail mount Terminal Assembly (TA), or port substrate mount TA. D Use polyamide (PA)

  Compression screw ports of materials Substrate mounting TA in the ring terminal area using polyamide (PA) material can be used with compression screw terminals using polycarbonate/acrylonitrile-butadiene-styrene (PC/ABS) material. The detachable terminal cable connects the DIN rail mounting TA to the FBM via a field connector on the baseplate where the FBM is mounted. The terminal cable is available in the following materials :0 polyurethane D Low smoke halogen free (LSZH). The end cable is available in a variety of lengths, up to 30 meters (98 ft) long, allowing the end component to be installed in the housing or in an adjacent housing.

  Input channels Eight resistive temperature detector (RTD) input channels. Each channel is isolated and independent.


标签: FBM42

联系方式

成都阳光熹禾电气有限公司

电话:18859254943

QQ:3561040004

电邮:sales@ygdcs.com

地址:成都高新区天益街北巷52号附14号2层

采购:FBM42 | 内置诊断和故障检测 | 高速数字输入/输出通道

产品推荐/ RELATED PRODUCTS