DSSB-01C | IC200GBI001 | 控制单元，|

DSSB-01C 是 ABB 公司生产的一款控制单元，具体信息如下：

产品编号：68300746 

产品描述：DSSB-01C PC 板件套装 

技术信息：主控制板用于 DSU 单元 

用途：作为工业自动化系统中的控制器，用于精确控制和监控工业过程 

输入电压：24V DC 

输出电压：0 ~ 10V DC 

控制范围：0 ~ 100% 

通信接口：Modbus RTU 

工作温度：-10℃ ~ +60℃ 

外形尺寸：100mm × 80mm × 30mm 

重量：200g 

安装方式：DIN 导轨安装 

外壳等级：IP20 

此外，DSSB-01C 控制单元的电流输出的出厂设置为 4-20 mA，并且信号可以配置为“主动”或“被动”模式 。

对于无防爆装置或在 2 区/2 区操作的设备，外部电源供应取决于信号配置模式。

对于在 1 区/1 区操作的设备，电流输出不能重新配置，并且必须在订购时指定所需的配置

The DSSB-01C is a control unit produced by ABB. The details are as follows:

Product number: 68300746

Product Description: DSSB-01C PC board set

Technical information: The main control board is used for the DSU unit

Use: As a controller in industrial automation systems, it is used to accurately control and monitor industrial processes

Input voltage: 24V DC

Output voltage: 0 ~ 10V DC

Control range: 0 ~ 100%

Communication interface: Modbus RTU

Operating temperature: -10℃ ~ +60℃

Dimensions: 100mm × 80mm × 30mm

Weight: 200g

Mounting method: DIN rail mounting

Housing grade: IP20

In addition, the current output of the DSSB-01C control unit is factory set to 4-20 mA, and the signal can be configured in either "active" or "passive" mode. For devices that are not explosion-proof or operate in zone 2 /2, the external power supply depends on the signal configuration mode. For devices operating in Zone 1 / Zone 1, the current output cannot be reconfigured and the desired configuration must be specified at the time of ordering