3BHE027632R0101   | I/O模块  |   3HNA023093-001  |   3HAC025562-001/06

　　型号：3BHE027632R0101

　　类别：I/O模块

　　成色：全新/非全新

　　货期：现货

　　质保：一年

　　产品描述

　　3BHE027632R0101 ABBI/O模块作为ABB机器人控制器与1/0设备之间的桥梁，3BHE027632R0101 ABB I/O模块负责传输和接收控制信号

　　实现机器人与外部设备的交互。

　　特征

　　高速数据传输

　　多个输入和输出通道

　　与ABB系统的兼容性

　　易于安装和配置

　　3BHE027632R0101 ABB I/0樘块是一种多功能、高性能的模块，可与不同的自动化系统无缝集成。它在传感器、执行器和控制设备之间提供

　　可靠的数据交换，提高了工业过程的整体效率和牛产力

　　(1)PLC输入模块与主电气设备的连接

　　图中松下PLC为直流点输入，即这样输入点共用一个共同端子COM,COM端带DC24V电源，编写程序时要注意使用的外部设备是常闭触点还是常开

　　触点。

　　输入端电气原理图中的停止按钮SB0使用串在控制线上的常闭触点进行关断控制。启动按钮SB1，触点常开。设计中的两个梯形图实现了相同的控制

　　功能，但停止信号X0使用不同的触点类型，因此连接端点的外部停止按钮触点类型不同。

　　I/0分配s0-x0、s1-x1，输出K0-Y0。当外部使用长闭合触点时，不操作按钮，输出Y0正常连接，在PLC控制系统中，外部开关无论启动或停止

　　般选择常开型。

　　(2)接近开关与PLC输入模块之间的连接在PLC控制系统设计中的布线工作比例很小，但它是编程设计的基础。为了保证接线工作正确，需要对PLC的

　　输入输出电路有一个清晰的认识。

　　Model: 3BHE027632R0101

　　Category: I/O module

　　Finish: New/not new

　　Delivery time: from stock

　　Warranty: One year

　　Product description

　　The 3BHE027632R0101 ABBI/O module acts as a bridge between the ABB robot controller and the 1/0 device, and the 3BHE027632R0101 ABBI/O module is responsible for transmitting and receiving control signals

　　Realize the interaction between the robot and external devices.

　　trait

　　High speed data transmission

　　Multiple input and output channels

　　Compatibility with ABB systems

　　Easy to install and configure

　　The 3BHE027632R0101 ABB I/0 block is a versatile, high-performance module that seamlessly integrates with different automation systems. It is provided between sensors, actuators and control devices

　　Reliable data exchange improves the overall efficiency of industrial processes and cattle productivity

　　(1) Connection between PLC input module and main electrical equipment

　　The Panasonic PLC in the figure is a DC point input, that is, the input point shares a common terminal COM,COM end with DC24V power supply, when writing the program, pay attention to the use of external equipment is normally closed contact or normally open

　　The contact.

　　The stop button SB0 in the input electrical schematic uses normally closed contacts strung along the control line for shutdown control. Start button SB1, contact normally open. The two trapezoids in the design achieve the same control

　　Function, but the stop signal X0 uses a different contact type, so the external stop button contact type of the connecting endpoint is different.

　　I/0 allocates s0-x0, s1-x1, and outputs K0-Y0. When the long closed contact is used externally, the button is not operated, and the output Y0 is connected normally. In the PLC control system, the external switch is started or stopped

　　Normally open type is generally selected.

　　(2) The connection between the proximity switch and the PLC input module has a small wiring work proportion in the design of the PLC control system, but it is the basis of programming design. In order to ensure that the wiring works correctly, it is necessary to check the PLC

　　Have a clear understanding of the input and output circuits.