.TX1631 | 光纤发射器 | 而实现高速、稳定的数据传输
型号:TX1631
类别:光纤发射器
。驱动控制器:DKC
·版本:3
·额定电流:40 A
。直流母线标称电压:700 V
TX1631 光纤发射器是一种电子设备,其主要功能是将电信号转换为光信号,并将这些光信号传输到光纤中,光纤发射器通常包括一个发光二极管(LED)或激光二极管(LD)以及一个数字
信号转换器1,其关键组件包括光源、调制器和光耦合器。
TX1631 光纤发射器是一种将电信号转换成光信号的装置,它通常由接口电路、源驱动电路和光源三个组件构成。其中,接口电路用于处理电信号,并在电信号和源驱动电路之间创建兼容性;源驱动电路的目的是改变光的电流光源,从而驱动光信号的强度;光源则是将电流能量转换为光能的组件。
光纤发射器的作用是将电信号转换为光信号,并通过光纤进行传输。在传输过程中,光信号可以在很长的距离内保持高强度和低衰减,从而实现高速、稳定的数据传输。
光纤发射器有多种类型,如 SFP 光纤发射器等。不同类型的光纤发射器在传输速率、传输距离、波长等方面可能会有所不同,因此在选择光纤发射器时,需要根据具体的应用需求进行选择。
Model :TX1631
Category: Fiber optic transmitter
. Drive controller :DKC
· Version :3
· Rated current: 40A
. Dc bus nominal voltage :700 V
The TX1631 fiber optic transmitter is an electronic device whose main function is to convert an electrical signal into an optical signal and transmit these optical signals to an optical fiber, which usually includes a light emitting diode (LED) or laser diode (LD) and a number
Signal converter 1, the key components of which include a light source, a modulator and an optical coupler.
TX1631 optical fiber transmitter is a device that converts electrical signals into optical signals, which is usually composed of three components: interface circuit, source driver circuit and light source. The interface circuit is used to process the electrical signal and create compatibility between the electrical signal and the source driver circuit; The purpose of the source drive circuit is to change the light current source, so as to drive the intensity of the light signal; A light source is a component that converts current energy into light energy.
The TX1631 optical fiber transmitter is used to convert electrical signals into optical signals and transmit them through optical fibers. During transmission, the optical signal can maintain high intensity and low attenuation over a long distance, enabling high-speed and stable data transmission.
There are many types of optical fiber emitters, such as SFP optical fiber emitters. Different types of optical fiber emitters may differ in terms of transmission rate, transmission distance, wavelength, etc., so when selecting optical fiber emitters, you need to choose according to the specific application needs.