5069-L320ER |5SHY5045L0020|控制器|
概述
适合需要低运动轴数和 I/O 点数的小型应用程序到大型应用程序
支持高速 I/O、运动控制、设备级环网和线性拓扑结构
提供一个 1 千兆 (Gb) 嵌入式 EtherNet/IP 端口，以便使用 CIP 安全连接、I/O和安全设备
包括可配置的双端口，支持双 IP 地址
提供增强的诊断和故障处理功能，并且显示控制器状态和故障
提供为尽可能发挥系统性能优化过的控制器功能
提供增强的安全功能，包括基于控制器的变更检测、记录、加密固件以及基于角色的例程和用户自定义指令访问控制
支持多达 31 个本地 Compact 5000™ I/O 模块
提供基于 EtherNet/IP 的集成运动控制，最多支持 32 个轴
提供范围广泛的存储选项，从 0.6 MB 到 10 MB
Compact GuardLogix 5380 安全控制器
使用 1oo1 架构实现 SIL 2/PLd 或使用 1oo2 架构实现 SIL 3/PLe
提供 0.6 MB 10 MB 的标准内存选件
提供 0.3 MB 5 MB 的安全内存选件
提供 1 千兆 (Gb) 嵌入式 Ethernet 端口
支持适合多达 180 个 EtherNet/IP 节点的通信选件
提供能够抵御恶劣环境的敷形涂覆选件
提供单控制器/软件/网络，实现标准和安全控制
提供混合和匹配安全及标准 I/O 的功能
提供与驱动器和运动集成的安全功能
能够从 PanelView™ 800 图形终端连接缩放的 HMI 选项
控制器安装在DIN导轨上。它们可以监视和控制本地和远程I/O模块，以及连接到EtherNet/P网络的其他设备。控制器支持
此功能:
使用紧凑型5000 1/0标准和安全模块作为本地1/0和远程I/O模块。申使用紧凑型5000 I/O模块和其他I/O模块作为远程I/O模块。
支持EtherNet/IP网络上的集成运动(并非所有控制器)。
使用双IP模式或线性/DLR模式。
使用两个以太网端口，让控制器连接到EtherNet/IP设备级和企业级网络。使用非易失性存储器的1784-SDHC8,1784-SDHC32,9509-CM SD CD4安全数字(SD)卡。用于临时连接的USB编程端口。
紧凑型GuardLogix 5380控制器具有保形涂层。顺应涂层提供一层保护，防止污染物和潮湿，帮助保护组件，并在恶劣的腐蚀性环境中延长产品使用寿命。具有表面涂覆层的产品在目录编号的未尾有一个'K'后缀。
summarize
Suitable for small applications that require low number of axes of motion and I/O points to large applications
Supports high-speed I/O, motion control, device-level ring networks, and linear topologies
Provides a 1 gigabit (Gb) embedded EtherNet/IP port for secure connections, I/O, and secure devices using CIP
It includes configurable dual ports and supports dual IP addresses
Provides enhanced diagnostic and troubleshooting capabilities, and displays controller status and faults
Provides controller functions optimized for maximum system performance
Provides enhanced security features, including controller-based change detection, logging, encrypted firmware, and role-based routine and user-defined instruction access control
Supports up to 31 local Compact 5000™ I/O modules
Provides integrated motion control based on EtherNet/IP and supports up to 32 axes
A wide range of storage options are available, from 0.6MB to 10MB
Compact GuardLogix 5380 Security controller
SIL 2/PLd is implemented using 1oo1 architecture or SIL 3/PLe is implemented using 1oo2 architecture
Standard memory options of 0.6MB and 10MB are available
Provides 0.3 MB 5 MB safe memory option
1 Gigabit (Gb) embedded Ethernet port available
Supports communication options for up to 180 EtherNet/IP nodes
Offers shape coating options that can withstand harsh environments
Single controller/software/network for standard and security control
Provides the ability to mix and match security and standard I/O
Provides security features integrated with drives and motion
The HMI option for scaling can be connected from the PanelView™ 800 graphics terminal
The controller is mounted on a DIN rail. They can monitor and control local and remote I/O modules, as well as other devices connected to EtherNet/P networks. Controller support
This feature:
The compact 5000 1/0 standard and security module is used as a local 1/0 and remote I/O module. Shin uses the compact 5000 I/O module and other I/O modules as remote I/O modules.
Support for integrated motion on EtherNet/IP networks (not all controllers).
Use dual IP mode or linear /DLR mode.
Use two EtherNet ports to connect the controller to EtherNet/IP device-level and enterprise-level networks. 1784-SDHC8,1784-SDHC32,9509-CM SD CD4 secure digital (SD) cards using non-volatile memory. USB programming port for temporary connections.
The compact GuardLogix 5380 controller features a conformal coating. Compliant coatings provide a layer of protection against contaminants and moisture, help protect components and extend product life in harsh, corrosive environments. Products with a surface coating have a 'K' suffix at the end of the catalog number.
