>>>>>型号:490NRP25400 光纤发射器、接收器、收发器
【功能描述】
Mouser编号:996-490NRP25400
制造商编号:
490NRP25400
制造商:Schneider Electric
客户编号:
客户编号
说明:
光纤发射器、接收器、收发器 FIBER OPTIC REPEATER MBPL LINE
490NRP25400光纤收发器是一种将电信号转换为光信号,并通过光纤进行传输的设备。它通常由发送(发射)和接收两部分组成,可以用于构建光纤通信网络或实现光纤传输。
该光纤收发器支持多种数据速率和传输距离,具体取决于产品的规格和配置。常见的速率有1Gbps、10Gbps等,传输距离则根据实际需求选择,从几公里到几十公里不等。
在发送端,电信号通过激光二极管转换为光信号,然后通过光纤进行传输。在接收端,光信号通过光电二极管转换为电信号,然后进行进一步的处理或分析。
光纤收发器具有以下优点:
高带宽:光纤传输具有极高的带宽,可以实现高速数据传输。
远距离传输:光纤传输不受电磁干扰和信号衰减的影响,可以实现长距离传输。
安全性高:光信号在光纤中传输时不易被窃取或干扰,提高了通信的安全性。
可靠性高:光纤收发器具有较长的使用寿命和较低的故障率,可靠性较高。
需要注意的是,使用光纤收发器时需要仔细选择适合的型号和配置,以确保满足实际需求。同时,安装和调试过程中需要遵循相关规范和操作步骤,以确保系统的稳定性和可靠性。
>>>>>型号:490NRP25400 光纤发射器、接收器、收发器
【英文介绍】
Mouser number: 996-490NRP25400
Manufacturer Number:
490NRP25400
Manufacturer: Schneider Electric
Customer ID:
Customer number
Instructions:
FIBER OPTIC REPEATER MBPL LINE. Fiber optic repeater MBPL line
The 490NRP25400 optical transceiver is a device that converts electrical signals into optical signals and transmits them through optical fibers. It usually consists of sending (transmitting) and receiving two parts, and can be used to build optical fiber communication networks or realize optical fiber transmission.
The fiber optic transceiver supports a variety of data rates and transmission distances, depending on the specifications and configuration of the product. Common rates are 1Gbps, 10Gbps, etc., and the transmission distance is selected according to actual needs, ranging from a few kilometers to dozens of kilometers.
At the sending end, the electrical signal is converted into an optical signal by a laser diode and then transmitted through an optical fiber. At the receiving end, the light signal is converted into an electrical signal by a photodiode, which is then further processed or analyzed.
Fiber optic transceivers have the following advantages:
High bandwidth: Optical fiber transmission has a very high bandwidth, which can achieve high-speed data transmission.
Long-distance transmission: Optical fiber transmission is not affected by electromagnetic interference and signal attenuation, and long-distance transmission can be achieved.
High security: The optical signal is not easy to be stolen or interfered with when it is transmitted in the optical fiber, which improves the security of communication.
High reliability: Fiber optic transceivers have a long service life and low failure rate, and high reliability.
It should be noted that when using optical transceivers, the appropriate model and configuration need to be carefully selected to ensure that the actual needs are met. During installation and commissioning, you must comply with relevant specifications and operation procedures to ensure system stability and reliability.
>>>>>型号:490NRP25400 光纤发射器、接收器、收发器