>>>型号:AS-BDEP-218 离散输入模 用于工业自动化和控制系统
【功能描述】
AS-BDEP-218是一款离散输入模块，通常用于为子系统或外部输入创建输入端口，将输入信号从系统的外部引入到内部。这款模块具有广泛的应用场景，特别是在工业自动化和控制系统领域。
AS-BDEP-218模块在紧急停止被激活时，能够使DSU停止并打开主接触器。当紧急停止功能停用，DSU复位后，模块能够恢复正常工作。此外，该模块还包含接地电流功能控制板（DSSB），
用于测量二极管供电单元的输入电流，并持续监测相电流的总和。
在电源及保护方面，AS-BDEP-218模块采用双电源冗余输入，电压范围为DC(9-36)V，典型工作电压为DC24V，功耗小于4W。该模块还具备DC1500V电压隔离以及反接保护功能，采用工业
端子接口。在出现故障时，如光纤链路故障或电源故障，模块能够输出告警信号，触点容量为DC48V/1A，同样采用工业端子接口。
在机械特性方面，AS-BDEP-218的外形尺寸为132mm×105mm×52mm，外壳防护等级为IP30，采用波浪纹铝制加强机壳。模块采用35mmDIN导轨安装方式，净重为800g。其工作环境温度
范围为-10-70℃，相对湿度应≤90%（无冷凝），存放温度范围为-40～80℃。
>>>>型号:AS-BDEP-218 离散输入模 用于工业自动化和控制系统
【英文介绍】
AS-BDEP-218 is a discrete input module typically used to create input ports for subsystems or external inputs, bringing input signals from the outside of the system into the inside. This module
has a wide range of application scenarios, especially in the field of industrial automation and control systems.
The AS-BDEP-218 module is capable of stopping the DSU and opening the main contactor when the emergency stop is activated. After the emergency stop function is disabled and the DSU is reset,
the module can resume normal operation. In addition, the module includes a Ground Current Function Control Board (DSSB), which measures the input current of the diode-powered unit and
continuously monitors the sum of the phase current.
In terms of power supply and protection, the AS-BDEP-218 module uses dual power supply redundant inputs, the voltage range is DC(9-36)V, the typical operating voltage is DC24V, and the power
consumption is less than 4W. The module also has DC1500V voltage isolation and reverse connection protection, using industrial terminal interfaces. When a fault occurs, such as a fiber link fault o
r a power supply fault, the module can output alarm signals. The contact capacity is DC48V/1A, and the industrial terminal is also used.
In terms of mechanical characteristics, the AS-BDEP-218 has an external dimension of 132mm×105mm×52mm, the housing protection class is IP30, and the case is reinforced with wavy aluminum.
The module is mounted with 35mmDIN rail and has a net weight of 800g. The operating temperature range is -10-70 ° C, the relative humidity should be less than 90% (no condensation), and the
storage temperature range is -40 ~ 80 ° C.
>>>>型号:AS-BDEP-218 离散输入模 用于工业自动化和控制系统
