>>>>型号:ELOPII 控制系统 具有数据缓冲的功能
【功能描述】
ELOPII是是一种控制系统。
ELOPII可以作为DCS（分布式控制系统）控制器使用，也可以作为ABB DCS的备件。此外，ELOPII组件还包括控制器、卡件和控制模块等，这些组件共同构成了PLC（可编程逻辑控制器）系统的一部分。
ELOPII的输出模块具有数据缓冲的功能，可以暂存由主机高速传来的数据，并以I/O设备所具有的速率将数据传送给设备，从而保证数据传输的效率和正确性。此外，它还具备差错控制的功能，能够对由
I/O设备传送来的数据进行差错检测，确保数据输入的正确性。
ELOPII组态步骤：
打开ELOPII软件后，首先创建新的工程。
选择指定的控制器型号，例如H51qe-HES。
设置控制器地址，如网卡RESxxx01:01表示一对CPU的BSN地址。
根据需要设置模拟量显示与通道状态故障对应地址。
进行删除点操作，可以通过双击位号，去掉勾选，删除各字段。
同样设置冗余卡通道，并应用后确认是否允许relode设置（不设置只能DOWNLODE）
>>>>型号:ELOPII 控制系统 具有数据缓冲的功能
【英文介绍】
ELOPII is a control system.
ELOPII can be used as a DCS (Distributed Control System) controller or as a spare part for ABB DCS. In addition, ELOPII components also include controllers, cards and control modules, which together
form part of the PLC (Programmable logic Controller) system.
The output module of ELOPII has the function of data buffering, which can temporarily store the data from the host at high speed, and transmit the data to the device at the rate of the I/O device, so
as to ensure the efficiency and correctness of data transmission. In addition, it also has the function of error control, which can detect the error of the data transmitted by the I/O device to ensure the correctness of the data input.
ELOPII configuration steps:
After opening the ELOPII software, first create a new project.
Select the specified controller model, for example, H51qe-HES.
Set the controller address. For example, NIC resxxx01.01 indicates the BSN address of a pair of cpus.
Set the address corresponding to the channel status fault for analog display as required.
To delete a point, double-click the bit number and uncheck it to delete each field.
Also set redundant cartoon channels, and confirm whether relode Settings are allowed after application (no setting can only DOWNLODE)
>>>>型号:ELOPII 控制系统 具有数据缓冲的功能
