>>>>>型号:IS200JPDDG1AAA 创建的PCB组件 电池系统供电
【功能描述】
IS200JPDDG1AAA是通用电气作为Mark VI系统的一部分创建的PCB组件。Mark VI由GE发布，作为其用于燃气轮机和蒸汽轮机管理的Speedtronic系列的一部分，该系列始于1960年代Mark I的发布。Mark VI通常由125Vdc电池系统供电。但是，它可以由120/240VAC电源供电，使用带有隔离变压器的电源转换器将功率整流至125Vdc。对于燃气轮机，点火变压器需要单独的电源，短路保护为20A或更低。
IS200JPDDG1AAA是高密度配电卡。该板为每个I/O包提供单独的受保护控制电源。可以使用J1和J1X连接器将多个IS200JPDDG1AAA板菊花链连接在一起;但是，完成此操作后，输入电流不能超过第一个JPDH J1插头的额定值。该IS200JPDDG1AAA可用于一些危险场所，包括1类2区、1类2区和ATEX。用户必须遵守UL/ATEX HazLoc的接线和维护要求。
IS200JPDDG1AAA有24个压敏电阻，分成三排，每排8个。它有24个2位插头，分为三排，每排8个（JR1-JR8、JS1-JS8、JT1-JT8）。该板还具有另外三个2位插头，分别标记为JR5、JS5和JT5。它有两个标有J1和J1X的6位插头。有关该板及其组件的更多信息，请参见GE出版物GEI-100861。
>>>>>型号:IS200JPDDG1AAA 创建的PCB组件 电池系统供电
【英文介绍】
The IS200JPDDG1AAA is a PCB component created by General Electric as part of the Mark VI system. The Mark VI was released by GE as part of its Speedtronic line for gas turbine and steam turbine management, which began with the release of the Mark I in the 1960s. The Mark VI is typically powered by a 125Vdc battery system. However, it can be powered from a 120/240VAC supply, using a power converter with an isolation transformer to rectifying the power to 125Vdc. For gas turbines, the ignition transformer requires a separate power supply with short circuit protection of 20A or less.
The IS200JPDDG1AAA is a high-density power distribution card. The board provides a separate protected control power supply for each I/O packet. Multiple IS200JPDDG1AAA boards can be Daisy chained together using J1 and J1X connectors; However, after this is done, the input current cannot exceed the rating of the first JPDH J1 plug. The IS200JPDDG1AAA can be used in a number of hazardous locations, including Class 1 Zone 2, Class 1 Zone 2 and ATEX. Users must comply with UL/ATEX HazLoc wiring and maintenance requirements.
The IS200JPDDG1AAA has 24 varistors divided into three rows of 8 each. It has 24 2-position plugs, divided into three rows of 8 each (JR1-JR8, JS1-JS8, JT1-JT8). The board also has three additional 2-position plugs, labeled JR5, JS5, and JT5. It has two 6-digit plugs labeled J1 and J1X. For more information about the board and its components, see the GE publication GEI-100861.
>>>>>型号:IS200JPDDG1AAA 创建的PCB组件 电池系统供电
