IC693CPU352RR  |  单插槽CPU模块  |  配置和编程软件支持 CPU352

　　型号：IC693CPU352RR

　　系列 ：90-30系列

　　产品类型 :CPU模块

　　微处理器: 80386EX

　　电压输入: 5 伏直流电

　　电流消耗 :670毫安

　　时钟速度 :25兆赫兹

　　定时器和计数器: 2000>

　　寄存器存储器 :9999字

　　以太网端口数 ;不适用

　　内存存储类型 ;RAM和闪存

　　典型扫描速率 ;每 1K 逻辑 0.22 毫秒(布尔触点)

　　串行端口'; RS-485(通过电源

　　电源要求: 670 毫安，+5 VDC 电源供电

　　处理器类型; 80386EX

　　用户记忆; 240K 字节

　　CPU类型 ; 单插槽CPU模块

　　IC693CPU352RR是GE Automation and Controls为90/30系列PLC系统制造的单插槽CPU模块。 每个系统的底板总数为 8 个，其中包括一个用于 CPU 的底板，以及 7 个远程和扩展。电源的负载要求为890mA，采用+5V直流电源供电。处理器类型是 80386EX，IC693CPU352RR 处理速度为 25Mhz。系统的最佳工作温度在 0 摄氏度到 60 摄氏度(32 华氏度到 140 华氏度)之间。该规范也称为环境温度。对于每 1K 逻辑(即布尔触点)，典型的扫描速率为 0.22 毫秒。

　　有 2000 多个定时器/计数器，并且还有移位寄存器。内置三个串行端口，支持RTU从站和SNP或SNPX从站，SNP或SNPX主站或从站，以及串行输入/输出(在端口1和端口2上)。通信支持LAN(支持多点)、以太网、Profibus、FIP、GBC、GCM+选项模块。闪存和 RAM 是可用的存储内存类型。Logicmaster 配置和编程软件支持 CPU352。

　　Model: IC693CPU352RR

　　Series: 90-30 series

　　Product type :CPU module

　　Microprocessor: 80386EX

　　Voltage input: 5 volts DC

　　Current consumption :670 MA

　　Clock speed :25 MHZ

　　Timers and counters: 2000>

　　Register memory :9999 words

　　Number of Ethernet ports; inapplicability

　　Memory storage type; RAM and Flash

　　Typical scanning rate; 0.22 milliseconds per 1K logic (Boolean contacts)

　　Serial port '; RS-485 (via power supply

　　Power requirements: 670 MA, +5 VDC power supply

　　Processor type; 80386EX

　　User memory; 240K bytes

　　CPU type; Single-socket CPU module

　　The IC693CPU352RR is a single socket CPU module manufactured by GE Automation and Controls for the 90/30 series PLC system. The total number of backboards per system is eight, including one for the CPU, and seven for remote and extension. The load requirement of the power supply is 890mA, and the power supply is +5V DC. The processor type is 80386EX, and the IC693CPU352RR has a processing speed of 25Mhz. The optimal operating temperature of the system is between 0 ° C and 60 ° C (32 ° F to 140 ° F). This specification is also called ambient temperature. For every 1K of logic (i.e., Boolean contacts), the typical scan rate is 0.22 milliseconds.

　　There are more than 2000 timers/counters, and there are shift registers. Three built-in serial ports support RTU slave and SNP or SNPX slave, SNP or SNPX master or slave, and serial input/output (on ports 1 and 2). Communication supports LAN (multi-point support), Ethernet, Profibus, FIP, GBC, GCM+ option modules. Flash and RAM are the types of storage memory available. The Logicmaster configuration and programming software supports CPU352.