IC693CPU364RR  |  单插座CPU  |   IC693CPU313RR  |  IC693CPU323CA

　　产品描述

　　IC693CPU364RR它是一个单插座CPU(来自GE Fanuc系列90-30)，带有嵌入式以太网电缆和内置串行端口。该单元是PLC的“大脑”，是大多数计算发生的地方。具体规格请参见IC693CPU364官网。IC693CPU364RR的标准应用是将计算机的9针串口通过IC693CPU364RR连接到IC693CPU364的标准以太网接口上。IC693CPU364RR的以太网接口为EGD (Ethernet Global Data)接口。这种内置以太网接口的好处是，您不需要在设备上使用单独的以太网模块，例如CMM321。实际上，您可以根据IC693CPU364以太网端口的内置特性来节省PLC插槽。

　　EGD还允许CPU364处理HHP配置模式不能处理的特殊参数。与CMM321不同，CPU364不需要外接收发模块。CPU364内置收发器，可通过10BASE-T接口连接。然而，CPU364确实提供了一些额外的功能，允许您添加外部收发器。这可以通过绕过内部收发器的AAUI端口来实现。内置以太网接口的另一个好处是，它可以在不使用PLC背板的情况下进行通信，从而产生比单独的CPU和以太网模块更快的通信速度。关于IC693CPU364的一些基本注意事项是，在使用CPU364时，必须在其所在槽位连接到机架接地。您可以在设备上找到接地线。

　　CPU364采用flash固件标准，无EPROM和EEPROM。IC693CPU364额定电流为1A，采用GE Fanuc保险丝44A725214-001。CPU364的最大CPU容量为2个

　　具体来说，PLC CPU的主要功能包括:

　　编程接受并存储来自程序员的用户程序和数据输入，并可以进行修改或更新。

　　从现场输入的用户程序和数据通过扫描接受并存储在输入状态表(即输入继电器)和数据寄存器(即所谓输入图像寄存器)中。

　　从存储器中逐条读取用户程序，通过解释用户逻辑完成用户程序中指定的各种任务，并更新输出映像寄存器的内容。

　　输出控制是根据电路存储在输出中的内容来实现的。

　　Product description

　　IC693CPU364RR

　　It is a single socket CPU(from GE Fanuc Series 90-30) with an embedded Ethernet cable and a built-in serial port. This unit is the "brain" of the PLC and is where most calculations take place. For details, see IC693CPU364 official website. The standard application of IC693CPU364RR is to connect the 9-pin serial port of the computer to the standard Ethernet interface of IC693CPU364 through IC693CPU364RR. The IC693CPU364RR uses an Ethernet Global Data (EGD) interface. The benefit of this built-in Ethernet interface is that you do not need to use a separate Ethernet module on your device, such as the CMM321. In fact, you can save PLC slots based on the built-in features of the IC693CPU364 Ethernet port.

　　EGD also allows the CPU364 to handle special parameters that the HHP configuration mode cannot handle. Unlike the CMM321, the CPU364 does not require an external transceiver module. The CPU364 has a built-in transceiver that can be connected via a 10BASE-T interface. However, the CPU364 does offer some additional features that allow you to add external transceivers. This can be done by bypassing the AAUI port of the internal transceiver. Another benefit of the built-in Ethernet interface is that it can communicate without the use of a PLC backplane, resulting in faster communication speeds than a separate CPU and Ethernet module. Some basic considerations about the IC693CPU364 are that when using the CPU364, it must be connected to the rack ground in its slot. You can find the ground cable on the device.

　　The CPU364 adopts the flash firmware standard without EPROM or EEPROM. The IC693CPU364 is rated at 1A and uses GE Fanuc fuse 44A725214-001. The CPU364 supports a maximum of two cpus

　　Specifically, the main functions of the PLC CPU include:

　　Programming accepts and stores user program and data input from the programmer and can be modified or updated.

　　User programs and data input from the field are accepted by scanning and stored in the input status table (i.e. input relay) and data register (i.e. so-called input image register).

　　Read the user program from the memory one by one, complete various tasks specified in the user program by interpreting the user logic, and update the contents of the output image register.

　　The output control is implemented based on what the circuit stores in the output. Perform various diagnostics product descriptions