IS200TTURH1CCC  |  涡轮终端板  |   用于连接TRPG板

　　模型:IS200TTURH1CCC

　　规格:

　　供电电压:24VDC

　　功耗:<20瓦

　　通讯协议:Modbus, Profibus，

　　EthernetlP

　　数据传输速率:最高可达10mbps

　　额定工作温度范围:-40℃~ +70℃

　　防护等级:IP67

　　IS200TTURH1CCC马克涡系统的大涡

　　车轮终端板(TTUR)

　　该是200转h1 CCC是一个更大的涡轮终端板(TTUR)为马克维尔系统。Ge不再支持markle系列部件，现在可能很难找到。AX Control确实试图将200转的h1CCC作为翻新或新的剩余产品呈现

　　剩余的组件保存在库存和IS200TTURH1CCC通常连接到主涡轮保护PCB(VTUR)。TTU

　　R PTUR组件，用于控制TRPG(Main Trip Terminal)板。它支持单工和TMR应用程序。

　　在IS200TTURH1CCC上，有三个37针母端口和三个37针公连接器。连接器用于连接TRPG板。有两个端子板，有两排端子。第一端子排具有标记为1-24的端子。第二端行有标记为25-48的端子。有两个绿色的3针插孔和一个白色的4针插孔。在底角处，有两个加强的端子孔。

　　Model: IS200TTURH1CCC

　　Specifications:

　　Power supply voltage :24VDC

　　Power consumption :<20 watts

　　Communication protocol :Modbus, Profibus,

　　EthernetlP

　　Data transfer rate: up to 10 Mbps

　　Rated temperature range :-40°C to +70°C

　　Protection level :IP67

　　IS200TTURH1CCC Arger vortex of Mark Vle system

　　Wheel Terminal Board (TTUR)

　　The is 200 tur h1 CCC is an Arger Turbine terminal board (TTUR) for Mark Vle systems. Ge no longer supports MarkVle series parts, which may now be hard to find. AX Control did attempt to present the is 200 tur h1CCC as a refurbished or new leftover

　　The remaining components are kept in stock and the IS200TTURH1CCC is usually connected to the main turbine Protection PCB(VTUR). TTU

　　R Uses the PTUR component to control the TRPG(Main Trip Terminal) board. It supports simplex and TMR applications.

　　On the IS200TTURH1CCC, there are three female 37-pin ports and three male 37-pin connectors. Connectors Connect the TRPG board. There are two terminal boards with two rows of ends. The first terminal block has terminals labeled 1-24. The second end row has terminals labeled 25-48. There are two green 3-pin jacks and one white 4-pin jacks. At the bottom corner, it has two reinforced terminal holes.