IS200TBCIH1CBC  |  触点端子板 |  用于控制工业环境中蒸汽轮机的所有操作

　　模型:IS200TBCIH1CBC

　　输入电阻(负载)30 MΩ(DC)，最小值

　　断电电阻30kq (DC)，典型

　　共模抑制- 80db (DC-100Hz)

　　模型

　　常用型号范围-12V至+12V峰值

　　引脚对引脚隔离200KQ，典型

　　产品描述

　　IS200TBCIH1CBC是一种称为触点端子板的设备。这是为Mark VI系列创建的PCB。Mark VI系列是通用电气(GE)制造的Mark系列的几个系列之一。这些系统已被开发用于控制工业环境中燃气和蒸汽轮机的所有操作。

　　IS200TBCIH1CBC是一个长电路板，有各种不同的电子元件。两个非常大的黑色纯终端占据了IS200TBCIH1BBC的左半部分。这些端子有48个银金属端子。这些终端由一系列从1到48的数字标识，每个终端块中有24(24)个。IS200TBCIH1CBC的右边是一长串圆形电容器。这些电容器是稳定的红色。在这些端子旁边布置有二十五(25)个电容器。位于IS200TBCIH1BBC的右边缘是三个插孔连接器端口，一个是银色的，一个是黑色的。每个连接器端口的右侧是一个非常小的集成电路，标有字母u。另外两个白色连接器位于IS200TBCIH1CBC顶部的中心。两个连接器都包含三(3)个端口，可用于将其他组件连接到IS200TBCIH1CBC。在PCB中心的右侧是一长排微小的电阻。这条线几乎跨越了IS200TBCIH1CBC的整个长度。

　　Model: IS200TBCIH1CBC

　　Input resistance (load)30 MΩ(DC), minimum value

　　Power off resistance 30 KQ (DC), typical

　　Common mode rejection -80 dB(DC-100Hz)

　　model

　　Common model range -12V to +12V peak

　　Pin to pin isolation 200KQ, typical

　　Product description

　　The IS200TBCIH1CBC is a device called a contact terminal board. This is a PCB created for the Mark VI series. The Mark VI series is one of several series that make up the Mark Series by General Electric or GE. These systems have been developed to control all operations of gas and steam turbines in industrial environments.

　　The IS200TBCIH1CBC is a long circuit board with a variety of different electronic components. Two (2) very large black pure terminals occupy the left half of the IS200TBCIH1BBC. These terminals have forty-eight (48) silver metal terminals. These terminals are identified by a series of numbers from one to forty-eight, with twenty-four (24) in each terminal block. To the right of the IS200TBCIH1CBC is a long string of circular capacitors. These capacitors are steady red. Twenty-five (25) capacitors are arranged next to these terminals. Located on the right edge of the IS200TBCIH1BBC are three jack connector ports, one in silver and one in black. To the right of each connector port is a very small integrated circuit labeled with the letter U. The other two (2) white connectors are located in the center of the top of the IS200TBCIH1CBC. Both connectors contain three (3) ports that can be used to connect other components to the IS200TBCIH1CBC. On the right side of the PCB center is a long row of tiny resistors. This line spans almost the entire length of IS200TBCIH1CBC.