IC200CHS002  |  I/O载波模块  用于快速组装和连接到背板

　　模型:IC200CHS002

　　产品描述:I/O载波模块

　　载体模块样式:盒式

　　尺寸高度:133.4毫米(5.25英寸)长度:66.80毫米(2.63英寸)

　　单根铜线尺寸:2.1 mm2 ~ 0.36 mm2

　　双铜线尺寸:0.86mm2 Max

　　IC200CHS002是VersaMax I/O载波模块。该模块提供了一种模块化的方法，因为它允许维修，故障排除和更换I/O模块，而无需拆除现有的终端。一般情况下，承载模块除了提供承载模块外，还提供安装和现场布线的背板通信功能。

　　该模块主要有36个端子，排列在A1 ~ A18和B1 ~ B18两条带上。该模块与VersaMax同一产品系列中的32点I/O模块或高密度I/O设备兼容。该模块有4个公共/电源连接，并嵌入一个键控拨号盘，该拨号盘被设置为与由I/O载波承载的模块的指定键控位置相匹配。该硬件还配备了一个载波配对连接器，用于快速组装和连接到背板。它还具有一个模块锁存锁孔，用于将托管IO模块锁定到位。

　　IC200CHS002端子可承受的暂态电压最高可达300vac。正常工作时，各端子的设计电压范围为0 ~ 264 VAC，各端子额定电流为2安培，各电源/公用端子容量为8安培。每个端子最多支持2根线的端接，单线连接的推荐线径为awg# 14(平均横截面2.1mm2)至awg# 22(平均横截面0.36mm2)。awg# 18(平均横截面0.86mm2)用于连接单个端子中的两(2)根导线，使端子短路。

　　Model: IC200CHS002

　　Product Description: I/O carrier module

　　Carrier module style: box style

　　Dimensions Height: 133.4 mm (5.25 in) Length: 66.80 mm (2.63 in)

　　Size of a single copper wire: 2.1 mm2 to 0.36 mm2

　　Double copper wire size: 0.86mm2 Max

　　The IC200CHS002 is the VersaMax I/O carrier module. The module offers a modular approach as it allows for servicing, troubleshooting and replacement of I/O modules without removing existing terminals. Typically, the carrier module provides backplane communication functions for installation and field wiring as well as hosting modules.

　　The module primarily has 36 terminals arranged in two (2) strips labeled A1 to A18 and B1 to B18. The module is compatible with 32-point I/O modules or high-density I/O devices in the same VersaMax product family. The module has 4 public/power connections and is embedded with a keying dial that is set to match the specified keying position of the module hosted by the I/O carrier. The hardware also comes with a carrier pairing connector for quick assembly and connection to the backplane. It also features a module latch latch hole for locking the managed IO module into place.

　　The terminals of the IC200CHS002 can withstand transient voltages up to 300 VAC. During normal operation, the design voltage range of each terminal is 0-264 VAC, the current rating of each terminal is 2 amps, and the capacity of each power/common terminal is 8 amps. Each terminal supports the termination of up to 2 wires, and recommended wire sizes are AWG # 14 (average cross section 2.1mm2) to AWG #22 (average cross section 0.36mm2) for single wire connections. AWG #18 (average cross section 0.86mm2) is used to connect two (2) wires in a single terminal to short-circuit the terminal.