IC697CSE925RR  | 单插槽PLC CPU |  够实时控制工业机械

　　型号：IC697CSE925RR

　　模块类型： 浮点 CPU

　　插槽数量： 1 (单插槽)

　　所需电流： 3.3 安培标称值

　　点数： 12K 输入和输出(任意混音)

　　串口：1

　　支持： IC660/IC661 I/O 和 IC697 I/O

　　该IC697CSE925RR由GE自动化生产，是一款能够实时控制工业机械的单插槽PLC CPU。 与 I/O 和“智能选件”模块的通信通过机架安装的连接背板完成。此设备由 MS-DOS 或在传统操作系统(包括 Windows 95 和 Windows NT)上运行的软件应用程序配置。 该IC697CPM925具有 64MHz 80486DX2 微处理器，每个布尔函数的浮点十进制计算速度快至 0.4 微秒。该器件支持高达 8K 的模拟 I/O 以及 12K 输入和输出的任意组合。

　　该IC697CSE925RR支持以下模块：IC697 系列的分立和模拟 I/O 模块、IC660 和 IC661 I/O 模块以及多个协处理器和通信模块。 该器件允许最多 1 兆字节或用户内存，由板载锂 CMOS 电池维护，设备的日历和时钟也是如此。操作系统固件位于闪存中。注意：闪存无法存储用户信息。用户无需拆卸设备或更换 EPROM 即可更新固件。要更新固件，请将设备连接到兼容的计算机，插入固件软盘，然后运行相应的 Loader 软件。

　　Model: IC697CSE925RR

　　Module type: floating point CPU

　　Number of slots: 1 (single slot)

　　Required current: 3.3 amps nominal value

　　Points: 12K input and output (any mix)

　　Serial port: 1

　　Support: IC660/IC661 I/O and IC697 I/O

　　The IC697CSE925RR, manufactured by GE Automation, is a single-slot PLC CPU capable of controlling industrial machinery in real time. Communication with the I/O and Smart Options modules is done through a rack-mounted connection backplane. This device is configured by MS-DOS or software applications running on legacy operating systems, including Windows 95 and Windows NT. The IC697CPM925 has a 64MHz 80486DX2 microprocessor and calculates floating-point decimal values as fast as 0.4 microseconds per Boolean function. The device supports analog I/O up to 8K and any combination of 12K inputs and outputs.

　　The IC697CSE925RR supports the following modules: discrete and analog I/O modules of the IC697 family, IC660 and IC661 I/O modules, and multiple coprocessors and communication modules. The device allows up to 1 Megabyte, or user memory, and is maintained by an onboard lithium CMOS battery, as are the device's calendar and clock. The operating system firmware is located in flash memory. Note: Flash memory cannot store user information. Users can update the firmware without disassembling the device or replacing the EPROM. To update the firmware, connect the device to a compatible computer, insert the firmware floppy, and then run the appropriate Loader software.

　　To operate the IC697CSE925RR, use the three-digit RUN/STOP switch or connect the programmer and use programming software. Devices can be configured through serial, parallel, or Ethernet interfaces. Device configuration is protected by password or manual memory protection key switch. When using the memory guard key switch, be sure to use the parallel connection programmer that is linked to the bus transmitter module. To prevent overheating, a fan of 70 cubic feet per minute (CFM) is required. Installation instructions are provided in the equipment manual. Power off the rack before attempting installation. The memory protection key switch must be OFF, and the toggle switch must be in the STOP position. The battery can be connected to either connector. Connect the device to the slot. Then power on the device.