IC698CPE030 | 可编程自动化控制器 (PAC)
<P> 该IC698CPE030是可编程自动化控制器 (PAC) 的 PACSystem RX7i 中最先进的中央处理器 (CPU) 之一。该
CPU 旨在满足行业的现代自动化、连接和集成要求。它以前由 GE 智能平台 (GE IP) 制造,但随着最近被艾默生自动化收购,PACSystem RX7i
现在是后者的一部分。</P>
<P> IC698CPE030处理器安装了计算机级微处理器,即 600MHz Pentium-M
微处理器,具有 64 MB 用户内存和 64 MB 用户闪存。它的布尔执行速度为每 1000 个布尔触点/线圈 0.069 毫秒。该 CPU 最多可容纳 32
K 位的离散 I/O 和 32 K 字的模拟 I/O,最多可以下载 512 个程序块到该 CPU,其中每个程序块最多可以有 128 KB
内存。</P>
<P> 该IC698CPE030还具有两 (2)
个以太网通信端口,能够自动感应网络传输速度,并可配置为半双工和全双工操作模式。内置的 Web 服务器和文件传输协议 (FTP)
功能可通过这些以太网端口访问,允许用户远程监控和配置处理器。除了内置以太网端口外,</P>
<P> 该 CPU 还具有一 (1)
个 RS232 端口;一 (1) 个 RS485 端口和一 (1) 个工作站管理器端口。这些通信接口支持SRTP、Modbus
TCP服务器和客户端、用于基于以太网的通信的以太网全局数据(EGD)和用于串行通信的Modbus RTU
Slave、SNP、串行I/O。</P>
<P> The IC698CPE030 is one of the most
advanced central processing units (cpus) in the Programmable Automation
Controller (PAC) PACSystem RX7i. The CPU is designed to meet the modern
automation, connectivity and integration requirements of the industry. It was
previously manufactured by GE Intelligent Platforms (GE IP), but with its recent
acquisition by Emerson Automation, PACSystem RX7i is now part of the
latter.</P>
<P> The IC698CPE030 processor is equipped with a
computer-grade microprocessor, namely a 600MHz Pentium-M microprocessor, with 64
MB of user memory and 64 MB of user flash memory. It has a Boolean execution
speed of 0.069 milliseconds per 1000 Boolean contacts/coils. The CPU can hold up
to 32K bits of discrete I/O and 32K words of analog I/O, and up to 512 blocks
can be downloaded to the CPU, where each block can have up to 128 KB of
memory.</P>
<P> The IC698CPE030 also features two (2) Ethernet
communication ports that automatically sense network transmission speeds and can
be configured for both half-duplex and full-duplex operating modes. The built-in
Web server and File Transfer Protocol (FTP) capabilities are accessible through
these Ethernet ports, allowing users to remotely monitor and configure the
processor. In addition to a built-in Ethernet port,</P>
<P> The
CPU also has one (1) RS232 port; One (1) RS485 port and one (1) workstation
manager port. These communication interfaces support SRTP, Modbus TCP server and
client, Ethernet Global Data (EGD) for Ethernet-based communication, and Modbus
RTU Slave, SNP, and serial I/O for serial communication.</P>