>>>>>型号:IS220UCSAH1A 处理器/控制器 用于连接通信
【功能描述】
IS220UCSAH1A是通用电气为Mark VI系统创建的处理器/控制器。Mark VI平台设计用于管理燃气轮机或蒸汽轮机，由GE作为Speedtronic系列的一部分发布。它具有HMI（人机界面）和专为运行重型涡轮机而设计的软件，例如CIMPLICITY图形界面。
该IS220UCSAH1A由单个盒装组件构成，带有一个前面板，用于连接通信，后边缘有两个螺钉安装座，三个侧面有格栅开口，以允许空气流动。该控制器设计用于安装在机柜内的底座。最多可以安装三个彼此相邻的组件，以实现紧凑的布置，轻松为三重冗余系统提供服务。
该IS220UCSAH1A可在 QNX 操作系统上运行。它有一个飞思卡尔 8349,667 MHz 处理器。该板使用额定功率为 18-36 V dc、12 W 的电源。该板可在 0 至 65 摄氏度的温度下使用，即使在最高额定温度下也不需要风扇进行冷却。该板可用于 NFPA 1 类 2 类应用。
IS220UCSAH1A 的前面板有六个母插孔连接器、一个 USB 端口和多个 LED 指示灯。 这包括前面板左侧标有 Link/Act 的 LED 指示灯，以及放置在面板中间的一排指示灯，分别标记为 Power、Boot、Online、Flash、DC 和 Diag。 插孔连接器用于以太网连接，允许主板与其他 MKVI、MKVIe 或 EX2100 激励控件进行通信， 以及维护站和操作站。
>>>>>型号:IS220UCSAH1A 处理器/控制器 用于连接通信
【英文介绍】
The IS220UCSAH1A is a processor/controller created by General Electric for the Mark VI system. The Mark VI platform is designed to manage gas or steam turbines and is released by GE as part of the Speedtronic family. It has an HMI (Human machine interface) and software designed for running heavy duty turbines, such as the CIMPLICITY graphical interface.
The IS220UCSAH1A is constructed of a single boxed assembly with a front panel for connecting communications, two screw mounting mounts on the back edge, and grille openings on three sides to allow air flow. The controller is designed for mounting on a base inside a cabinet. Up to three components can be installed next to each other for a compact arrangement that easily serves triple redundant systems.
The IS220UCSAH1A runs on the QNX operating system. It has a Freescale 8349,667 MHz processor. The board uses a power supply rated at 18-36 V dc and 12 W. The board can be used at temperatures from 0 to 65 degrees Celsius and does not require a fan for cooling even at the highest rated temperature. The board can be used for NFPA Class 1 Class 2 applications.
The front panel of the IS220UCSAH1A has six female jack connectors, a USB port, and multiple LED indicators. This includes LED indicators labeled Link/Act on the left side of the front panel, and a row of indicators placed in the middle of the panel labeled Power, Boot, Online, Flash, DC, and Diag. Jack connectors are used for Ethernet connectivity, allowing the motherboard to communicate with other MKVI, MKVIe, or EX2100 excitation controls, as well as maintenance and operation stations.
>>>>>型号:IS220UCSAH1A 处理器/控制器 用于连接通信
