>>>>>型号:531X305NTBANG1 电源和编码器 终端板
【功能描述】
通用电气制造了 531X305NTBANG1 卡，用作 NTB/3TB 终端板。该端子板是作为 531X 系列替换驱动和励磁板的成员而开发的。 该板提供了许多接口系统功能。 该卡的功能包括继电器和串行输出、模拟 I/O、电源和编码器。
安装此 NTB/3TB 终端板后，它为驱动器提供一系列功能。安装后，531X305NTBANG1 能够生产稳压和非稳压电源。稳压电源的额定电压为 5 VDC 和 15 VDC，而非稳压电源的额定电压为 24 VDC 或 125 VAC。额定电压为 5 V 和 15 V 的编码器可以使用板载跳线进行配置。该板还包括 7 个继电器输出，由 A 型或 C 型输出组成。每个继电器内的触点额定值为 120 VAC。低电平模拟 I/O 也可以使用板载的四个电位计进行缩放。
>>>>>型号:531X305NTBANG1 电源和编码器 终端板
【英文介绍】
Ge manufactured 531X305NTBANG1 cards for use as NTB/3TB terminal boards. The terminal board was developed as a member of the 531X series replacement drive and exciter board. The board provides many interface system functions. The card's features include relays and serial outputs, analog I/O, power supply, and encoder.
Once this NTB/3TB terminal board is installed, it provides a range of functions for the drive. After installation, the 531X305NTBANG1 is capable of producing both regulated and unregulated power supplies. Regulated power supplies are rated at 5 VDC and 15 VDC, while non-regulated power supplies are rated at 24 VDC or 125 VAC. Encoders rated at 5 V and 15 V can be configured using onboard jumpers. The board also includes seven relay outputs, consisting of type A or Type C outputs. The contacts in each relay are rated 120 VAC. Low-level analog I/O can also be scaled using four on-board potentiometers.
>>>>>型号:531X305NTBANG1 电源和编码器 终端板
