FCM10EF | 现场总线通信接口模块 | 具有多个通信接口
型号：FCM10EF
电压 0-5V，+6%(仅 3700A)
类型 TMR、AI
输入点数量 32、差分、直流耦合
隔离点 无
输入 更新速率 55 ms
分辨率 12 位
精度< FSR 的 0.15%
0°至 60°C
输入电阻(负载)30 MΩ(DC)，最小值
断电电阻 30 KQ (DC)，典型
共模抑制 -80 dB(DC-100Hz)
典型
共模范围 -12V 至 +12V 峰值
引脚间隔离 200KQ，典型
FCM10E现场总线通信接口模块是一种在工业自动化和控制系统中广泛应用的设备。它主要用于实现现场设备与系统之间的数据通信和信号传输，从而确保设备的正
常运行和系统的稳定性。
这种模块通常具有多个通信接口，可以与不同类型的现场设备讲行连接，如传感器、执行器、控制器等，它支持多种通信协议，如PROFIBUS、Modbus等
以适应不同的应用环境和需求。
FCM10EF 现场总线通信接口模块的主要功能包括数据采集、传输、处理和控制，它可以实时采集现场设备的运行数据，通过总线网络将数据传输到控制系统进行处
理，并根据控制指令对现场设备进行远程控制。
在选型和使用现场总线通信接口模块时，需要考虑多个因素，如诵信协议、接口类型、传输读率、工作环境等。此外，还需要确保模块的兼容性和可靠性
以满足系统的长期稳定运行需求。
现场总线通信接口模块也在不断升级和完善。未来，这类模块将更加智能化、集成化，能够更好地满足工业自动化和控制随着工业自动化技术的不断发展，系统对通信和数据处理的需求。
Model: FCM10EF
Voltage 0-5V, +6%(3700A only)
Type TMR, AI
Number of input points 32, differential, DC coupling
Isolation point none
Enter update rate 55 ms
Resolution 12 bits
Accuracy < 0.15% of FSR
0° to 60°C
Input resistance (load)30 MΩ(DC), minimum value
Power off resistance 30 KQ (DC), typical
Common mode rejection -80 dB(DC-100Hz)
model
Common model range -12V to +12V peak
Pin to pin isolation 200KQ, typical
FCM10E fieldbus communication interface module is widely used in industrial automation and control system. It is mainly used to realize data communication and signal transmission between the field equipment and the system, so as to ensure the positive of the equipment
Constant operation and system stability.
This module usually has multiple communication interfaces, which can be connected with different types of field devices, such as sensors, actuators, controllers, etc., and it supports a variety of communication protocols, such as PROFIBUS, Modbus, etc
To adapt to different application environments and requirements.
The main functions of FCM10EF fieldbus communication interface module include data acquisition, transmission, processing and control. It can collect the operating data of field equipment in real time and transmit the data to the control system through the bus network
And perform remote control of the field equipment according to the control instructions.
When selecting and using fieldbus communication interface module, many factors need to be considered, such as reciting protocol, interface type, transmission reading rate, working environment and so on. In addition, it is necessary to ensure the compatibility and reliability of the modules
To meet the long-term stable operation requirements of the system.
The fieldbus communication interface module is also constantly upgraded and improved. In the future, such modules will be more intelligent and integrated, and can better meet the needs of industrial automation and control. With the continuous development of industrial automation technology, the system needs communication and data processing.
