>>>型号:9200-01-01-10-00 双线速度地震探头传感器 用于工业自动化和控制系统
【功能描述】
9200-01-01-10-00双线速度地震探头传感器是一款振动监测产品。该传感器是两线结构，采用动线圈技术，能够直接提供与传感器振动速度成正比的电压输出。
9200-01-01-10-00这款传感器适用于连续监测或与测试或故障诊断仪表一起应用于周期性测量中，主要用于测量轴承箱、机壳或结构的振动。其安装角度/最小工作频率选项为0±2.5, 4.5赫兹（270 cpm），顶部为航空插头连接，
采用M10X1双头螺栓安装。此外，它的灵敏度为20 mV/mm/s (500 mV/in/s) ±5%，频率响应范围为4.5Hz（270 cpm）到1kHz（60,000 cpm）。
9200-01-01-10-00该传感器系统由9200传感器、84661或9571电缆和可选的振动监测器（如1900/65、2300/20、3500/42）组成。使用时，请确保按照产品说明和安装指南正确安装和配置传感器，以确保其正常工作并准确监测振动数据。
>>>>型号:9200-01-01-10-00 双线速度地震探头传感器 用于工业自动化和控制系统
【英文介绍】
The 9200-01-01-10-00 dual-wire speed seismic probe sensor is a vibration monitoring product. The sensor is a two-wire structure with moving coil technology that provides a voltage output directly
proportional to the vibration speed of the sensor.
The 9200-01-01-10-00 sensor is suitable for continuous monitoring or for use in periodic measurements with test or fault diagnosis instruments, primarily to measure the vibration of bearing boxes,
housing or structures. The mounting Angle/minimum operating frequency option is 0±2.5, 4.5 Hz (270 cpm), with an aviation plug connection at the top and M10X1 stud mounting. in addition, it has
a sensitivity of 20 mV/mm/s (500 mV/in/s) ±5% and a frequency response range of 4.5Hz (270 cpm) to 1kHz (60,000 cpm).
9200-01-01-10 The sensor system consists of a 9200 sensor, 84661 or 9571 cable, and optional vibration monitors such as 1900/65, 2300/20, 3500/42. When in use, ensure that the sensor is properly
installed and configured according to the product instructions and installation guide to ensure its proper operation and accurate monitoring of vibration data.
>>>>型号:9200-01-01-10-00 双线速度地震探头传感器 用于工业自动化和控制系统
