>>>型号:330180-90-00 高性能传感器 用于工业自动化和控制系统
【功能描述】
330180-90-00前置传感器是一款高性能传感器设备。它属于本特利3300 XL系列的一部分，专门设计用于接收非接触式3300系列或3300 XL电涡流探头和延伸电缆的信号。接收到的信号随后被传送至本特利bently3500模块、2300/20、
1900/65等振动监测器产品，以便进行进一步的分析和处理。
该前置传感器的主要特点是其高灵敏度，灵敏度达到了7.87 mV/μm（200 mV/mil），这确保了它能够精确捕捉到微小的振动和位移变化。此外，它的抗无线电干扰能力强，即使在玻璃纤维防护罩中安装，也不会受到附近无线电信号的干扰。
安装330180-90-00前置传感器时，需要注意将其安装在远离高温环境的地方，确保周围环境无明显的蒸汽和水珠、无腐蚀性的汽体，并保持干燥、振动小，以及前置器周围的环境温度与室温相差不大。同时，安装时必须避免有其他干扰信号
影响测量电路，因此需要采用适当的隔离和屏蔽接地，将信号所受的干扰降至最低限度。
这款前置传感器非常适合用于压缩系统、速度测量和流体薄膜轴承机器的状态监测。它的单元和布线具有互换性，可以方便地与其他非3300 XL系列传感器系统组件进行互换，这为用户提供了更大的灵活性和便利性。
综上所述，330180-90-00前置传感器是一款功能强大、性能稳定且灵活的传感器设备，适用于各种工业环境和应用场景，能够为用户提供准确、可靠的设备状态监测数据。
>>>>型号:330180-90-00 高性能传感器 用于工业自动化和控制系统
【英文介绍】
The 330180-90-00 Front sensor is a high performance sensor device. It is part of the Bentley 3300 XL series and is specifically designed to receive signals from non-contact 3300 Series or 3300 XL eddy current probes
and extension cables. The received signal is then transmitted to vibration monitor products such as the Bentley bently3500 module, 2300/20, 1900/65 for further analysis and processing.
The main feature of the front sensor is its high sensitivity of 7.87 mV/μm (200 mV/mil), which ensures that it can accurately capture small vibration and displacement changes. In addition, its anti-radio interference ability
is strong, even if installed in the glass fiber shield, it will not be interfered with nearby radio signals.
When installing the 330180-90-00 front sensor, it is necessary to pay attention to install it in a place away from high temperature environment, ensure that there is no obvious steam and water droplets in the surrounding
environment, non-corrosive vapor body, and keep dry, small vibration, and the ambient temperature around the front is not much different from room temperature. At the same time, the installation must avoid other
interference signals affecting the measurement circuit, so it is necessary to use appropriate isolation and shielding ground to reduce the interference of the signal to a minimum.
This front-facing sensor is ideal for compression systems, speed measurement and condition monitoring of fluid film bearing machines. Its units and wiring are interchangeable and can be easily interchanged with other
non-3300 XL series sensor system components, which provides users with greater flexibility and convenience.
In summary, the 330180-90-00 front sensor is a powerful, stable and flexible sensor device, suitable for various industrial environments and application scenarios, and can provide users with accurate and reliable equipment condition monitoring data.
>>>>型号:330180-90-00 高性能传感器 用于工业自动化和控制系统
