DSAI146 3BSE007949R1 | DDSAI 146 模拟输入单元 31 ch.铂100
型号：DSAI146 3BSE007949R1
类别：DDSAI 146 模拟输入单元 31 ch.铂100，
成色：全新/非全新
快递：顺丰/德邦
质保：一年
货期：现货
产品净厚度/长度：324 毫米
产品净高：22.5 毫米
产品净宽：225 毫米
产品净重：0.317 千克
.模拟输入板，也称为模拟输入模块，是专门用于模拟量信号采集和转换的设备。
使用模拟输入板的一般步骤包括：
硬件准备与安装：DSAI146 3BSE007949R1 选择合适的模拟输入板，确保其规格与PLC系统兼容。将模拟输入板插入PLC的扩展槽中，并使用螺丝固定。
软件配置：打开PLC编程软件，创建新项目并添加模拟输入板。设置模块的参数，包括输入通道、采样速率、分辨率、输入信号类型等。
连接传感器：将传感器连接到模拟输入板的输入通道上，确保接口匹配并按照接线图正确连接。
编程与调试：DSAI146 3BSE007949R1 在PLC编程软件中编写相应的程序，用于读取模拟输入板的值并进行处理。将程序下载到PLC中进行测试和调试，确保模拟输入板能够正确读取传感器的值。
DSAI146 3BSE007949R1 | DDSAI 146 Analog Input Unit 31 ch. Platinum 100 |
Model: DSAI146 3BSE007949R1
Category: DDSAI 146 Analog Input Unit 31 CH.Platinum 100,
Finish: New/not new
Express: SF Express/Debon
Warranty: One year
Delivery time: from stock
Product net thickness/length: 324 mm
Product height: 22.5 mm
Product width: 225 mm
Net weight: 0.317 kg
Analog input board, also known as analog input module, is a device specially used for analog signal acquisition and conversion.
General steps to use an analog pad include:
Hardware preparation and installation: DSAI146 3BSE007949R1 Select the appropriate analog input board to ensure that its specifications are compatible with the PLC system. Insert the analog pad into the expansion slot of the PLC and secure it with screws.
Software configuration: Open the PLC programming software, create a new project and add an analog input pad. Set the parameters of the module, including input channel, sample rate, resolution, input signal type, etc.
Connect the sensor: Connect the sensor to the input channel of the analog input board, ensuring that the interface matches and is connected correctly according to the wiring diagram.
Programming and debugging: DSAI146 3BSE007949R1 write the corresponding program in PLC programming software for reading the value of the analog input board and processing. The program is downloaded to the PLC for testing and debugging to ensure that the analog pad can correctly read the value of the sensor.
