>>>>>型号:AIP571 自动化控制器 具有高度的可靠性和稳定性
【功能描述】
YOKOGAWA AIP571 BUS1 是一款高性能的工业自动化控制器，适用于各种工业场景。它的设计结构紧凑，具有高度的可靠性和稳定性，能够满足复杂的工业控制需求。
技术说明
通讯接口： RS485
通讯协议： Modbus RTU
电源电压： AC220V
工作温度： -10℃ ~ 55℃
存储温度： -40℃ ~ 70℃
湿度要求： 10% ~ 90%RH，无凝结
AIP571 BUS2火灾报警时，报警控制器通过输出模块启动需要联动的外控设备，如防排烟阀、送风阀、防火卷帘门、风机、警铃等，并可接受设备的 动作回答。输出模块连接在控制器的回路总线 上，可以安装在所控设备的附近，也可安装在楼层端子模块箱内。
采电子写码，可以现场编码。输出 模块的输出控制逻缉可以根据工程情况编程完成。当控制器接收到探测器的报警信号后，根据预先编入的程序，控制器通过总线将联动控制信号输送 到输出模块，输出模块启动需要联动的消防设备;设备动作后会接受一个信号回答。
>>>>>型号:AIP571 自动化控制器 具有高度的可靠性和稳定性
【英文介绍】
The YOKOGAWA AIP571 BUS1 is a high performance industrial automation controller suitable for a variety of industrial scenarios. Its compact design, with a high degree of reliability and stability, can meet the complex industrial control needs.
Technical specification
Communication interface: RS485
Communication protocol: Modbus RTU
Power supply voltage: AC220V
Operating temperature: -10℃ ~ 55℃
Storage temperature: -40℃ ~ 70℃
Humidity: 10% to 90%RH, without condensation
AIP571 BUS2 Fire alarm, the alarm controller through the output module to start the need to link the external control equipment, such as smoke exhaust valve, air supply valve, fire shutter door, fan, alarm bell, and can accept the action of the device answer. The output module is connected to the loop bus of the controller and can be installed near the control device or in the floor terminal module box.
Adopt electronic coding, can be field coding. The output control logic of the output module can be programmed according to the project situation. When the controller receives the alarm signal of the detector, according to the pre-programmed program, the controller transmits the linkage control signal to the output module through the bus, and the output module starts the fire fighting equipment that needs linkage; The device responds with a signal when it acts.
>>>>>型号:AIP571 自动化控制器 具有高度的可靠性和稳定性
